10/7/98
***********************************


1. Make 2 bootable diskette 
2. Unzip file into different directory then copy them to each diskette.
3. Please make sure R3BIO & R3Config should copy to the bootable diskette.

To installation:
1. Use R3BIOS diskette to flash the BIOS on Raid Port III
2. Use R3Config diskette to Configuration Raid 0, 1, 5




disk 1= array BIOS & driver v4.20.10

scan array 1000u2 hardware then,
auto-flashes array1000 BIOS v4.20.10

disk 2=bootable configurations,
run prior to operating system driver installation.

disk 3=for aro1130u2 NT,NETWARE AS DISK "A"

disk 4=for aro1130u2 NT,netware as disk "B"

Raid port III can be used on DBS and support RAID 0,1,5.